Fujitsu Ricoh Fujitsu fi-7700 Document Scanner - Manual (Page 126)

Appendix
Chapter 7 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
126
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
When your document is jammed inside the scanner, remove
the document in the following procedure:
1
Remove all documents from the ADF paper chute
(feeder).
2
Open the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24) .
3
Remove the jammed document.
4
Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 24) .
7.1 Paper Jam
 Do not use force to pull out the jammed
document, and make sure to open the ADF
first.
 Be careful not to touch any sharp parts upon
removing jammed documents.
 Be careful not to get things such as hair, a tie
or necklaces caught inside the scanner.
 The inside of the ADF may become extremely
hot during operation.
When the ADF is open, it might close
accidentally. Be careful not to get your
fingers caught.
ATTENTION
 Make sure you check the documents and the paper path
thoroughly. Remove any metal objects such as staples or paper
clips to prevent paper jams.
 Be careful not to damage the glass surface and the guides
when removing documents with metal objects such as staples
or paper clips.
Be careful not to get your fingers caught
when closing the ADF.