Epson EL 486UC - Manual (Page 96)

Lotus 1-2-3 or Symphony
If you have not yet installed Lotus 1-2-3 or Symphony, follow
the instructions in your Lotus documentation to install it. Then
follow these steps to install the drivers:
1.
2.
3.
4.
5.
6.
7.
8.
Insert Utility Diskette 1 in drive A.
Type
A:
and press Enter to log onto drive A.
Copy the drivers from the Utility Diskette 1 to the Lotus or
Symphony program directory on your hard disk.
If you are installing drivers for l-2-3 to the C:\LOTUS
directory, type the following and press Enter:
SET123 C:\LOTUS
If you are installing drivers for Symphony to the
C:\SYMPHONY directory, type the following and press
Enter:
SETSYMPH C:\SYMPHONY
Log onto your Lotus program directory.
Type
INSTALL
and press Enter to run the installation
program.
From the main menu, select
Advanced options
and press
Enter.
Thenselect
Add new drivers to library
and press
Enter.
When the program finishes adding drivers to the library,
select
Modify current driver set
and press Enter.
Installing Video Drivers 5-3