Epson EL 486UC - Manual (Page 97)

9. Select
Text display
to modify the text mode or
Graphics display
to modify the graphics resolution.
Then press Enter.
10. Select the TVGA driver you want to install from the
displayed list and press Enter.
11. Select
Return to menu
and press Enter.
12. At the Installation menu, select
Save changes.
13. At the prompt, type the name you want to use for the driver
set and press
Enter.
14. Exit the Install program.
15. When you start 1-2-3 or Symphony, type
123
or
SYMPHONY,
followed by the name of the driver set you want to use, and
then press Enter.
Microsoft Windows
If you have not yet installed Windows 3.1, follow the
instructions in your Windows documentation to install it with
the standard VGA driver. Then follow these instructions to
install the new driver:
1. Log onto your Windows program directory.
2. Type
SETUP
and press Enter.
3. At the System Information screen, select
Display
and press
Enter.
4. From the Display menu, select
Other (Requires disk
provided by hardware manufacturer
1 and press
Enter.
5-4 Installing Video Drivers