QSC Audio AcousticPerformance Series Loudspeaker (Black) - Manual (Page 6)

6 QSC, LLC / AcousticPerformance™ Series Loudspeaker Application Guide
Accessories
M10 flying kit
The AP loudspeakers have M10 threaded attachment points for suspending or flying. QSC offer
a kit of three M10Ч1.50Ч35–38 mm forged steel shoulder eye bolts, part number FG-000431-00.
Shackles, cables, etc., are not included. Consult a licensed rigger or structural engineer for design-
ing flown loudspeaker systems.
Subwoofer caster kit
A kit of 3-inch casters is available for the AP-212sw subwoofer.
Accessory poles
Two accessory poles are available to use with the AP-212sw subwoofer, and they support either the AP4122m or the AP5122m
loudspeaker system. The subwoofer has two threaded M20 inserts to accommodate these poles. One is oriented for use
with the subwoofer standing vertically and the other, for use with the subwoofer lying
horizontally.
One accessory pole is 26.4
inches (670 mm) long, and is
for use with the subwoofer
either vertical or horizontal
(below left), and the longer
36-inch (914 mm) pole
is only for use with the
subwoofer lying horizontally
(below right).
The 26.4-inch pole is QSC
part number CH-000960-00.
The 36-inch pole is QSC
part number CH-001035-00.