Enterasys Networks Enterasys SecureStack A2 A2H124-48P - Manual (Page 73)

SecureStack A2 PoE Installation Guide A-1
A
Specifications
This appendix provides information about the following:
Enterasys Networks reserves the right to change the specifications at any time without
notice.
Switch Specifications
Table A‐1 provides the I/O ports, processors and memory, physical, and environmental
specifications for the A2H124‐24P.
Table A‐2 provides the I/O ports, processors and memory, physical, and environmental
specifications for the A2H124‐48P.
For information about... Refer to page...
Switch Specifications A-1
Mini-GBIC Input/Output Specifications A-4
Gigabit Ethernet Specifications A-4
MGBIC-02 Specifications (1000BASE-T) A-7
Regulatory Compliance A-8
Table A-1 A2H124-24P Switch Specifications
Item Specification
RJ45 ports 1 through 24 Twenty-four 10/100BASE-T compliant ports with auto-sensing
and auto-negotiation via RJ45 UTP connectors.
RJ45 ports 25 and 26 Two 10/100/1000BASE-TX compliant ports with auto-sensing
and auto-negotiation via RJ45 UTP connectors for stacking. In
standalone mode, these ports can be used for host connections
and interswitch links.
SFP ports 27 and 28 Two slots that support optional Mini-GBICs 1000BASE-FX
fiber-optic connections and 1000BASE-T copper connections.