Epson PhotoPC 3100Z - Manual (Page 54)

3-2 Playing Back and Managing Images With Your Camera
L Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley R4C7850
Rev. C
A5 size PLAYBACK.FM
4/27/01 Pass 3
1. Set the dial switch to , then turn on the camera.
A photo is displayed on the LCD monitor.
Note:
No Images is displayed when there are no photos
saved on the camera’s memory card.
2. To display four photos at a time, press the Multi
button once. Multi changes to 1/9, and small
“thumbnails” of the last four photos you took
appear on the screen, with the currently selected
photo framed in white.
Press the 1/9 button to display nine photos at a
time. 1/9 changes to 1/1.
3. Press the arrow icon buttons to select a photo with
the white frame. Hold the button down to move
through the photos quickly.
When the frame reaches the first or last photo in
the current group, the previous or next group of
photos is displayed.
4. To display only the currently selected photo,
press the 1/1 button. 1/1 changes to Multi.
Magnifying photos
You can view a magnified version of the photos saved
in your camera on the LCD monitor. Follow the steps
below.
1. Set the dial switch to , then turn on the camera.
2. To enlarge the view of the currently displayed
photo, press the T button on the back of the camera
under the dial switch.
A number appears at the top center of the LCD
monitor, and an icon appears in the top left corner
of the LCD monitor that indicates the portion of
the photo which is currently displayed.
Hold down the T button to continue magnifying
the photo. You can magnify the photo until the
number at the top center of the LCD monitor
reaches x3.0.
Press the T
button to
magnify the
image.