Epson PhotoPC 3100Z - Manual (Page 70)

4-8 Making Settings
L Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley R4C7850
Rev. C
A5 size MAKESET.FM
4/27/01 Pass 3
Making manual focus settings
When in the Manual camera mode, you can make
focus settings manually. Follow these steps.
1. Make sure that Manual is selected as the camera
mode. (See “Making camera mode settings” on
page 4-6.)
2. Remove the lens cap, set the dial switch to , and
turn on the camera.
Note:
You cannot make manual focus settings when taking
pictures using the viewfinder.
3. If you want to make focus settings manually when
using the macro feature, press the
button.
4. Press the MENU CHANGE button.
5. Press the up and down arrow icon buttons to
select a manual focus setting.
You can choose between AF for automatic focus,
for when the subject is about one meter away,
for when the subject is about three meters
away, and for when the subject is more than
three meters away.
When using the macro feature, you can choose
between M1 for when the subject is about
0.2 meters away, M2 for when the subject is about
0.5 meters away, or AF for automatic focus. The
smaller the value, the closer the subject should be
to the camera.
Adjusting the sensitivity setting
Your PhotoPC 3100Z has the following sensitivity
settings.
Standard sensitivity, equivalent to ISO 100
High sensitivity, equivalent to ISO 200
Super high sensitivity, equivalent to ISO
400