Vivotek ND9542P 32-Channel 4K UHD NVR (No HDD) - Manual (Page 63)

VIVOTEK - Built with Reliability
User's Manual - 63
2-2-6. Right-click Commands
Left-click to select a camera. Right-click to display the selection menu.
1. Camera information : Click to display camera name, resolution, codec, or frame rate on the
view cell. The information will display on the upper left corner of a view cell.
2. Stream : Select to display the main or subordinate stream.
3. Disable live streaming : Choose to display snapshots on the screen instead. The snapshots
are regularly replaced.
4. Fit screen with ratio : The NVR server automatically optimizes the display of camera view
cells. However, you can still select this option to display the camera's original aspect ratio: for
example, the original video feed can be 4:3. Without the fit screen, every camera's image will
be expanded to fill the view cell.
5. Show VCA rule : Displays the Smart VCA rules you previously configured via a web console.
6 . Show tool bar : You can hide the tool bars by deselecting this option.
7. Pin status bar : If selected, the status bar will constantly display on screen.
8. Log in/Log out : Log in to enable system configuration.
A time tab is displayed at the lower center of the screen. You can move your cursor to the lower
center to display the time tab and the alarm panel.