Senal XU-2496-C XLR to USB-C Audio Interface - Manual (Page 5)

5 Instructions
Monitoring with Your Headphones
You can plug your headphones directly into the XU-2496-C to
monitor your live microphone and computer’s playback audio
without latency.
Warning! Turn down the headphone volume before plugging
in your headphones.
Use the headphone level to adjust the
headphone volume.
Use the monitor mix level to adjust the
balance between the live microphone and
the computer’s playback audio.
Note:
audio recording software to prevent feedback.
Setting the Microphone Input Gain
Use the Mic Gain to adjust your
microphone’s input gain level.
The peak level indicator displays three levels of gain.
Green : There is an audio signal, and it will stay green while
recording.
Yellow : Audio is at the highest level before clipping.
Red : Clipping.
Attaching the XU-2496-C to a
Mic Stand
Use the included straps to attach the
XU-2496-C to your mic stand.
Volume
Monitor
PB MIC
Mic Gain