BOSS RC-202 Loop Station - Manual (Page 20)

20
USING THE UNIT SAFELY
IMPORTANT NOTES
Placement
• Depending on the material and
temperature of the surface on which
you place the unit, its rubber feet
may discolor or mar the surface.
Repairs and Data
• Before sending the unit away for
repairs, be sure to make a backup of
the data stored within it; or you may
prefer to write down the needed
information. Although we will do our
utmost to preserve the data stored
in your unit when we carry out
repairs, in some cases, such as when
the memory section is physically
damaged, restoration of the stored
content may be impossible. Roland
assumes no liability concerning the
restoration of any stored content
that has been lost.
Additional Precautions
• Any data stored within the unit can
be lost as the result of equipment
failure, incorrect operation, etc.
To protect yourself against the
irretrievable loss of data, try to make
a habit of creating regular backups
of the data you’ve stored in the unit.
• Roland assumes no liability
concerning the restoration of any
stored content that has been lost.
• Use only the specified expression
pedal (Roland EV-5, FV-500H/L;
sold separately). By connecting
any other expression pedals, you
risk causing malfunction and/or
damage to the unit.
• Do not use connection cables that
contain a built-in resistor.
Intellectual Property Right
• It is forbidden by law to make an
audio recording, video recording,
copy or revision of a third party’s
copyrighted work (musical work,
video work, broadcast, live
performance, or other work),
whether in whole or in part, and
distribute, sell, lease, perform
or broadcast it without the
permission of the copyright owner.
• Do not use this product for
purposes that could infringe on
a copyright held by a third party.
We assume no responsibility
whatsoever with regard to any
infringements of third-party
copyrights arising through your
use of this product.
• The copyright of content in this
product (the sound waveform
data, style data, accompaniment
patterns, phrase data, audio loops
and image data) is reserved by
Roland Corporation.
• Purchasers of this product are
permitted to utilize said content
(except song data such as
Demo Songs) for the creating,
performing, recording and
distributing original musical works.
• Purchasers of this product are NOT
permitted to extract said content
in original or modified form, for the
purpose of distributing recorded
medium of said content or making
them available on a computer
network.
• MMP (Moore Microprocessor
Portfolio) refers to a patent
portfolio concerned with
microprocessor architecture, which
was developed by Technology
Properties Limited (TPL). Roland
has licensed this technology from
the TPL Group.
• The SD logo ( ) and SDHC logo
( ) are trademarks of SD-3C, LLC.
• ASIO is a trademark and software
of Steinberg Media Technologies
GmbH.
• This product contains eParts
integrated software platform of
eSOL Co.,Ltd. eParts is a trademark
of eSOL Co., Ltd. in Japan.
• Roland, BOSS and LOOP STATION
are either registered trademarks or
trademarks of Roland Corporation
in the United States and/or other
countries.
• Company names and product names
appearing in this document are
registered trademarks or trademarks
of their respective owners.
WARNING
Concerning the Auto Off function
The power to this unit will be turned off
automatically after a predetermined amount of
time has passed since it was last used for playing
music, or its buttons or controls were operated
(Auto Off function). If you do not want the power to be
turned off automatically, disengage the Auto Off function
(p. 7).
Use only the supplied AC adaptor and the correct
voltage
Be sure to use only the AC adaptor supplied with
the unit. Also, make sure the line voltage at the
installation matches the input voltage specified
on the AC adaptor’s body. Other AC adaptors
may use a different polarity, or be designed for a different
voltage, so their use could result in damage, malfunction,
or electric shock.
CAUTION
Precautions concerning use of phantom power
supply
Always turn the phantom power off when
connecting any device other than condenser
microphones that require phantom power. You
risk causing damage if you mistakenly supply
phantom power to dynamic microphones, audio playback
devices, or other devices that don’t require such power.
Be sure to check the specifications of any microphone you
intend to use by referring to the manual that came with it.
(This instrument’s phantom power: 48 V DC, 10 mA Max)