Epson 1640SU User Manual
Page 20
1-10
Setting up the Scanner
R4C5950
Rev. C
A5 size
SETUP.FM
2/8/01
Pass 3
L
Proof Sign-off:
KOW K.Tsukagoshi J.Miyakoshi
M.Fujimori
NOC Lee
5. Turn on the scanner by pressing the
P
Operate button. The
indicator light starts flashing.
6. Make sure the carriage moves slightly and the fluorescent
lamp on the carriage turns on.
7. The indicator light stays on in green, meaning the scanner has
completed initialization.
8. Turn off the scanner.
If the scanner does not work as described, make sure the power
cord is firmly plugged in and that you have released the
transportation lock, then try again.
Note:
The scanner turns off the fluorescent lamp if it does not receive any
commands from the computer within 15 minutes.
c
Caution:
Whenever you turn off the scanner, wait at least 10 seconds before
plugging it back in. Rapidly plugging and unplugging the
scanner can damage the scanner.
carriage
(in the home position)