Epson 1640SU - Manual (Page 22)

1-12 Setting up the Scanner
R4C5950
Rev. C
A5 size SETUP.FM
2/8/01 Pass 3
L Proof Sign-off:
KOW K.Tsukagoshi J.Miyakoshi
M.Fujimori
NOC Lee
SCSI ID number
Each device has a SCSI ID number. The scanner’s default SCSI ID
number is 2. See “Changing the SCSI ID Number or SCSI Board”
in your Online Reference Guide to learn how to change the SCSI ID
number.
Terminator
The scanner has a built-in internal terminator (always ON), which
allows SCSI devices to communicate properly with each other.
Make sure the scanner is the last device in the daisy chain and the
other devices in the daisy chain are terminated properly.
Connect the scanner to your computer or to another SCSI device
as follows:
Note:
The combination of connectors on the SCSI interface cable you need
varies depending on the maker of your SCSI device and SCSI interface
board.
1. Make sure the scanner, computer, and all other SCSI devices
are turned off and unplugged from the power source.
c
Caution:
Do not connect the scanner to the computer or other devices
while they are turned on as damage may occur.