Epson 10600 - Manual (Page 139)

5-10
5-10 | Maintaining and Transporting the Printer
Replacing Ink Cartridges
Before you begin a large print job, you should check your ink levels as
described below. If one of your cartridges is low, you can replace it before
you start. Or you can wait until the ink runs out, replace the cartridge, and
resume printing without any loss of print quality.
Partially used cartridges can be saved for up to six months and reused for
running smaller print jobs. It’s a good idea to store them in individual,
resealable plastic bags in case of ink leakage.
Checking Ink Levels
When one of the Ink Out lights is flashing (and INK LOW is displayed on
the control panel), the corresponding cartridge is almost out of ink. Make
sure you have a replacement cartridge.
When the light stays on and INK OUT is displayed, the cartridge is empty.
You must replace it before you can continue printing.
Note
You can also check ink
levels before any INK
OUT lights have started
flashing. See page 5-2.
Ink Out lights