Epson 10600 - Manual (Page 66)

1-51
Setting Up the Printer | 1-51
5. Select Local Port , then click New Port . The following dialog box
appears:
6. In the text box, type the appropriate information for your system using
the syntax below, then click OK :
\\name of computer connected to the printer\name of the shared printer
7. In the Printer Ports dialog box, click Close .
8. On the Ports screen, make sure the new port is added and its checkbox is
selected. Then click OK .
Before printing, be sure to test the printer as described in the following
sections and perform any needed adjustments:
• Run a nozzle check from the control panel, as described on page 5-4.
• Perform a print head alignment, as described on page 1-39.