Electrolux 80850 i - Manual (Page 10)

Operating Instructions
10
Control Panel
The Control Panel comprises the ON/OFF switch and the programme
buttons with LED indicators.
Signal Tone Button: In addition to the wash program printed on the
front panel, this button can be used to set whether a signal tone is to
indicate that a wash program is finished.
Water Softener Button: In addition to the wash program printed on
the front panel, this button can be used to adjust the dishwasher's
water softener.
The Multi-Display can display,
– the hardness setting to which the water softener is set.
– whether the signal tone is switched on or off.
– the start delay that is set.
– how long the current wash programme can be expected to last.
– which fault has occurred on the dishwasher.
The indicators have the following significance :
3 The FILTER indicator is intended to remind you to check the filters in
the dishwasher from time to time and, if necessary, to clean it. The
indicator illuminates at regular intervals, independent of the amount of
soiling of the filters.
SALT Refill with special salt
RINSE AID Refill with rinse aid
WATER Open tap
FILTER Clean the dishwasher's filter system
DOOR The dishwasher door is open
SPRAY ARM The middle spray arm is jammed
Multi-
Display
Control Panel
Indicators
Set Start
Delay
Air Outlet for Fan
Assisted Drying
Door
Handle
Display for the Individual
Wash Programme Steps
Water Softener
Button
Signal
Tone
Button