Electrolux 80850 i - Manual (Page 31)

Operating Instructions
31
7. Put the flat filter back in the base of
the washing compartment
8. Place the coarse/fine filter in the
microfilter and press together.
9. Put the filter combination in place
and lock by turning the handle clock-
wise to the stop. During this process
ensure that the flat filter does not
protrude above the base of the wash-
ing compartment.
1 The dishwasher must not be used
without filters under any circum-
stances.
What to do, if ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call an engineer to resolve a fault
listed here, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is in guarantee.
...Error messages
• If the multi-display indicates the fault code (2, or the WATER,
DOOR or SPRAY ARM indicator illuminates, you can probably rec-
tify the fault yourself. After rectifying a (2 fault or a fault related to
the WATER indicator, press the button for the wash programme that
has been started. The wash programme should continue. If the fault
code is displayed again, contact AEG Service Force.
• For all other faults that are indicated, please contact AEG Service
Force stating the fault code.