Stopping engine, Hedge trimming – Echo HC-150 User Manual

Page 15

Advertising
background image

H

EDGE

C

LIPPER

O

PERATOR

'

S

M

ANUAL

15

A

STOPPING

ENGINE

1. Throttle

Release throttle and allow engine to return to idle before shutting
off engine.

2. Stop Switch

Move stop switch (A) to STOP position.

WARNING

DANGER

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using hedge
clipper again.

HEDGE

TRIMMING

WARNING

DANGER

Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.

1. Hold trimmer firmly and squeeze throttle trigger to accelerate engine.

2. Tilt trimmer so cutting teeth are angled slightly toward the hedge or

shrub and proceed to cut.

WARNING

DANGER

Never remove hands from unit when blades are moving.

WARNING

DANGER

The engine continues running even when the blades have stopped
due to an obstruction. If this occurs, stop the engine, disconnect
ignition cable and remove the obstruction.

Advertising