Echo HC-150 - Manual (Page 27)

H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
27
S
PECIFICATIONS
MODEL ----------------------------------------------------- HC-150
Length ------------------------------------------------------- 1,040 mm (41.0 in.)
Width -------------------------------------------------------- 240 mm (9.45 in.)
Height ------------------------------------------------------- 225 mm (7.87 in.)
Weight, dry ------------------------------------------------- 5.52 kg (12.2 lb.)
Type of Engine --------------------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine
Displacement ----------------------------------------------- 21.2 cc (1.29 cu.in.)
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler / with catalyst
Carburetor -------------------------------------------------- Zama w/purge
Ignition System -------------------------------------------- Flywheel Magneto, Capacitor discharge ignition
Spark Plug -------------------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed Fuel - gasoline and oil
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend TM Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.5 lit. (16.9 fl. oz)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 5.88:1
Cutter -------------------------------------------------------- Double Reciprocating Blade, Double Edge
Length ---------------------------------------------------- 490 mm (19.3 in.)
Pitch ------------------------------------------------------- 35 mm (1.38 in.)
Height ----------------------------------------------------- 21 mm (0.83 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------ 13 mm (1/2 in.)
Idle Speed (RPM) ------------------------------------------ 2,750 - 3,250
Wide Open Throttle (RPM) ------------------------------- 9,500 - 11,500