Echo HC-150 - Manual (Page 23)

H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
23
SHARPENING BLADES
Level 3.
Tools required: (2) 10 mm Sockets & Extensions , Flat file, Screw-
driver
Parts required: None
WARNING DANGER
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
A
Gear Box Assembly
Level 1.
Tools required: Grease Gun, Clean rag
Parts required: ECHO
®
LUBE TM 14 oz. (P/N 91015) or Lithium Based
Grease.
1. Clean dirt from the grease fitting (A).
2. Carefully pump grease into fitting (A). DO NOT force grease. Too
much pressure will force grease past seals and cause damage.
Apply 1-2 pumps of grease every 15-25 hours of operation.
3. Wipe excess grease from around grease fitting.