Holder C-Trac C 9700 - Manual (Page 198)

Operating Instructions
145 052 197
C 9700 ... C 9.88 H
Maintenance Every 3000 Service Hours
Checking the Injection Nozzles
ATTENTION
This work may only be carried out by an
authorized workshop.
- Clean the fuel injector nozzles.
- Check the fuel injector nozzles with a test pressure of
210 +8 bar.
Changing the Toothed Belt
See the workshop manual of the engine manufacturer.
ATTENTION
This work may only be carried out by an
authorized workshop.
- Remove the left-hand cover of the toothed belt drive.
- Check the toothed belt for cracks over its entire
length.
- Replace damaged toothed belts.
NOTE
When replacing the toothed belt, also replace
the idler pulley.