Hitachi 57T600 - Manual (Page 28)

28
HOW TO USE THE REMOTE TO
CONTROL YOUR TV
ቮ
ASPECT button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
4:3 STANDARD Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
area of the picture will age more rapidly than the gray areas.
4:3 EXPANDED Use this aspect mode to display conventional (4:3) sources by expanding the outer edges of the image
to fill the 16:9 screen. The center of the image remains unaltered.
4:3 Zoom1/Zoom2 Use these aspect modes to zoom in on conventional (4:3) sources.
16:9 STANDARD Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect
ratio.
16:9 Zoom Use this aspect to Zoom-in once while in 16:9 aspect.
4:3
INPUT 4:3 EXPANDED 4:3 ZOOM1
4:3 ZOOM2 16:9 STANDARD
4:3 STANDARD
16:9
INPUT 4:3 EXPANDED 4:3 ZOOM1
4:3 ZOOM2 16:9 STANDARD
4:3 STANDARD
INPUT
16:9
16:9 STANDARD
16:9 ZOOM
16:9 ZOOM
16:9 ZOOM
(1) NTSC Signal Format received
(2) 480i/480P Signal Format received
(3) 720P/1080i Signal Format received
NOTE: When in ANT C, signal format is dependent on broadcaster.
THE
REMO
TE
CONTR
OL