Hitachi 57T600 - Manual (Page 30)

30
HOW TO USE THE REMOTE TO CONTROL YOUR TV
ት
PICTURE-IN-PICTURE buttons
See separate section on pages 33-35 for a description.
ቶ
PIP CH button
Use the PIP CH button to select between main picture and sub-picture tuning. The channel number which is highlighted indicates
what channel is being controlled.
VID1 ~ VID5
When the remote control is in TV mode, press these buttons to directly select the video input sources between the five video inputs.
When the remote control is in Set-Top-Box mode (STB) these buttons will control the Set-Top-Box or satellite receiver, and execute
the secondary functions labeled as SVCS and SCHD.
Ant A 28
TAKA
YP B P R :1
VID1
Stereo
ST/SA
Video:2
VID2
Video:4
VID4
Video:5
VID5
Video:3
VID3
VID 1 VID 2
VID 3
VID 4 VID 5
Ant
ታ
VOLUME, MUTE button
Press the VOLUME up (
̆) or down (̄) button until you obtain the desired sound level.
To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUTE button. Press the
MUTE button again to turn the sound off completely (MUTE). To restore the sound, press the MUTE button one more time, or press
the VOLUME Up (
̆) button.
Closed Captioning will display automatically when MUTE/SOFT MUTE is on and Closed Caption is set to AUTO (See page 70).
When the TV power is turned off at a volume level 31 or greater, the volume level will default to 30 when the TV is turned on.
However, if it is set to a level 30 or less, the volume level will be at the level it was set when the TV is turned ON.
ቴ
LAST CHANNEL (LAST CH) button
Use this button to select between the last two channels viewed (Good for watching two sporting events, etc.).
Volume 8 Mute 8 Soft Mute 8
MUTE MUTE
Ant A 10 Ant A 39
LAST CH
THE
REMO
TE
CONTR
OL