Hitachi 50UX26B/27K - Manual (Page 51)

INITIAL SETUP
51
have cable TV.
Press CURSOR or to highlight and select the correct SIGNAL SOURCE mode.
Press EXIT to quit MENU or CURSOR to return to previous menu.
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in CATV1 mode, set SIGNAL
SOURCE to CATV2.
AUTO CHANNEL SET
This feature will automatically store active TV channels in CHANNEL MEMORY. This
will allow you to skip over unused channels when using the CHANNEL UP (
) or