Hitachi 50UX26B/27K - Manual (Page 70)

HOME THEATER
70
HOME THEATER
Use this function to choose Picture and Sound settings for a true
HOME THEATER experience.
THEATER MODES
Use this function to choose from automatic picture and sound settings to optimize your
TV's performance.
PICTURE
Use CURSOR
or or the HOME THEATER button on your remote control to
change THEATER MODES settings. When MOVIE mode is chosen, AI and DYNAMIC
BASS are automatically set to ON.
When SPORTS mode is chosen, AI is automatically set to ON while DYNAMIC BASS is
automatically set to OFF.
Press EXIT to quit menu or CURSOR to return to previous menu.
SURROUND
The following surround settings will reproduce the "live" sound you would hear in
concert halls, sports stadiums, movie theaters, etc. when you set up your speaker
system as shown in the section on rear panel connections on pages 13-15. The
surround system is most effective with movie and other stereo material that is Dolby
Surround encoded, and played on a stereo VCR.
PICTURE
When using WIRELESS SOUND (TRANSMITTER OUT jacks on rear panel), REAR
SPEAKERS mode must be chosen to receive the Surround audio program.
To enter the SURROUND MODE, use CURSOR
or to highlight then press
CURSOR to select SURROUND MODE of your choice.
Now press CURSOR or to highlight, then press CURSOR to select function to
be adjusted.
Use CURSOR or to adjust the volume of rear and main speakers. Main volume
also controls AUDIO TO HI-FI. Adjust Main volume first.
Each surround setting has separate main and rear volume controls, except OFF and
Dolby 3CH which have no rear volume controls. DOLBY PRO LOGIC also has a center
volume, while MATRIX and HALL have balance controls. (Balance while in DOLBY
PRO LOGIC mode is adjusted by using the TEST TONE volume controls.)
The center and rear volume will increase or decrease when main is adjusted to keep an
equal balance between the surround channels.
The maximum volume allowed for the center and rear will depend on how loud the main