Hitachi 57X500 - Manual (Page 55)

CHANNEL MANAGER
55
ON-SCREEN DISPLA
Y
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP (
̆ ) or DOWN ( ̄ ).
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antennas are
connected, switch antenna inputs and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL MANAGER - SCAN to add or to erase additional channels.
Auto Channel Scan
THUMB
STICK
SELECT
THUMB
STICK
SEL Cancel
Cancel
Scanning Channel Number: 66
Move SEL Select
Channel Source
Auto Channel Scan Start
Chan. Manager
Ant. A
Channel List
Antenna Cable(1) Cable(2)
Move SEL Select
Channel Source
Auto Channel Scan Start
Chan. Manager
Ant. A
Channel List
Antenna Cable(1) Cable(2)
Chan. Manager
Ant. A
Auto Channel Scan