Wiper blades – HONDA 2009 S2000 User Manual
Page 190
Advertising
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the new wiper blade into the
holder until the tabs lock.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm down against
the windshield.
4.
5.
6.
7.
Wiper Blades
Ma
int
e
na
nce
187
REINFORCEMENT
BLADE
2009 S2000
Table Of Contents
Main Menu
Advertising
This manual is related to the following products: