Hoover WindTunnel - Manual (Page 4)

4
STEP IV Position tools
11 12
A
B
C
11
Place smaller unridged end of
wand, into bottom of rack.
Snap wand into clip. Repeat with
other wand.
12
Snap ends of dusting brush (A),
crevice tool (B) and furniture
nozzle (C) into clips as shown.
Cleaner description
13
1
2
3
4
5
6
7
8
9
10
13
14
15
16
2
2
4
15
19
21
11
12
20
17
18
8
13
1. Handle
2. Cord hooks:
wrap cord around
hooks for storage. The top
hook can be rotated right or left
for easy cord release.
3. Hose
4. ON/OFF switch:
located on left rear
corner of cleaner body
5. Carrying handle
6. Bag door
7. Stair cleaning handle:
located on
lower edge of bag door.
8. Handle release lever: step on
lever to lower handle to operating or low
positions.
9. Headlight*
10. Nozzle control knob:
slide
knob to correct setting for height of
carpet being cleaned.
11. Furniture guard: helps prevent
cleaner from marking furniture.
12. Edge groomers
13. Embedded Dirt FINDER
display*
14. 'Dirt FINDER' sensitivity switch*
15. Wands
16. Check bag indicator*
17. Final filter exhaust
18. Dusting brush
19. Crevice tool
20. Furniture nozzle
21. Hose hook
*some models only
TM
The assembled cleaner will look like the
drawing above.
Operate cleaner only at voltage
specified on data plate on bottom of
cleaner.