Henny Penny SPACE SAVER 605ESC63XXXX - Manual (Page 13)

1.5 Specifications, water
1.5.1 Specifications, soft water
Value Parameters
Drinking water, cold Type
2–6 bar/200–600 kPa Supply pressure
< 1.5 mmol/l, < 5 °dH (soft water) Hardness
¾" outside thread Thread
DN 15 hose with ¾" union nut Connection
Table 12: Specifications, soft water
1.5.2 Specifications, hard water
Value Parameters
Drinking water, cold Type
Up to 50 °C (122 °F) Temperature
2–6 bar/200–600 kPa Supply pressure
0–4 mmol/l, 0–25 °dH Hardness
¾" outside thread Thread
DN 15 hose with ¾" union nut Connection
Table 13: Specifications, hard water
1.5.3 Specifications, waste water
Value Parameters
Up to 80 °C (176 °F)
For adjusting the waster water temper-
ature, see chapter “Standard settings”
in the operating manual.
Temperature
DN 40 direct connection Connection
Table 14: Specifications, waste water
1.6 Specifications, power supply
Size Parameters
605 610
IP X5 Protection type
3 PE / AC 50/60 Hz
3 NPE / AC 50/60 Hz
Mains type
208 Voltage (V)
5,1 7,4 Connected load (kW)
16 25 Fuses (A)
13 Planning and installation instructions
Global Foodservice Solutions
Planning
Space$aver ™