Henny Penny SPACE SAVER 605ESC63XXXX - Manual (Page 27)

1. Remove the back panel.
2. Pass the LOA connection cable through the strain relief screws
into the unit.
3. Tighten the strain-relief screws securely so that the LOA connection
cable cannot be pulled out.
1
Figure 5: Connecting the performance optimization system (LOA)
4. Connect the LOA connection cable to the terminal strip (1), (see
Chapter “Description of the terminal strip”, Page 22 ).
5. Remount the back panel.
27 Planning and installation instructions
Global Foodservice Solutions
Electricity
Space$aver ™