Hitachi DH 50MB - Manual (Page 21)

21
English
2. Anchor hole drilling (Rotation + Hammering)
Adaptor for SDS-plus shank bit
3. Large-dia. hole boring (Rotation + Hammering)
4. Drilling holes....For drilling metals and wooden materials
5. Bolt plaching operation with Chemical Anchor (Rotation + Hammering)
6. Crushing (Hammering)
(Guide plate)
Code No.
985388
955169
(1) 13mm drill chuck
(13VLA)
Code No. 950272
(2) Chuck adaptor
(SDS max shank)
Code No. 313468
(2) Core bit
External dia.
2" (50 mm)
4-1/8" (105 mm)
5" (125 mm)
(1) Center pin
Code No.
955165
(3) Core bit shank
(SDS max shank)
Code No.
313467
(3) Chuck wrench
Code No. 930515
(Standard socket
on the market) (1) Chemical Anchor Adaptor
(SDS max shank)
Square dimensions of the side
of the socket installation
1/2" (12.7 mm)
3/4" (19.0 mm)
Code No.
313469
313470
(2) Adaptor for SDS-plus shank bit
(SDS max shank) Code No. 313465
(1) Drill Bit
(SDS-plus shank)
(1) Bull point
Overall length Code No.
11" (280 mm) 313471
15-3/4" (400 mm) 313472