Hitachi DH 50MB - Manual (Page 22)

22
English
7. Groove digging and edging (Hammering)
8. Asphalt cutting (Hammering)
9. Digging
10. Surface Roughing (Hammering)
11. Tamping (Hammering)
12. Syringe (for chip removal)
NOTE:
Specifications are subject to change without any obligation on the part of the
HITACHI.
(1) Cold chisel
Overall length Code No.
11" (280 mm) 313473
15-3/4" (400 mm) 313474
(1) Cutter
Overall length Width Code No.
15-3/4" (400 mm) 1-31/32" (50 mm) 313473
(1) Scoop
(1) Bushing Tool
Code No. 313477
(2) Shank
Overall length Code No.
8-21/32" (220 mm) 313479
(1) Rammer
Code No. 313478
(2) Shank
Overall length Code No.
8-21/32" (220 mm) 313479
Code No. 313476
Code No. 944575