HP C5370A - Manual (Page 38)

4-4 All About Paper
Special Considerations When Using Transparency Film
‹ Load a maximum of 80 transparency sheets at a time.
‹ Be sure to specify “Transparency” as the Paper Type setting.
‹ Ink dries slower on film. Be sure to allow enough time for the ink
to dry before using the transparency.
‹ If you are copying from a transparency (that is, your original is
printed on transparency film), place a blank piece of paper over the
transparency on the copier glass.
NOTE We recommending using only HP Premium Transparency Film when copying
on transparencies. Other transparency film can jam in the copier.
Automatic Document Feeder Requirements
‹ Load a maximum of 25 originals in the automatic document feeder
at a time.
‹ Use only originals printed on plain paper (white and colored),
letterhead, and HP Premium Inkjet Paper in the 16
– 24 lb
(60 – 90 g/m
2
) range in the automatic document feeder.
‹ Always insert originals with the printed-side facing back in the
feeder and the top of the paper to the right.
‹ Do not start copying until the “Document loaded” message
appears on the front panel display and you see the Copy Quality
lights flash.
NOTE Do not load photos, paper sizes other than letter or A4, photo paper,
transparency film, labels, or envelopes in the automatic document feeder.
Doing so may cause a paper jam.
How to Order Quality HP Papers
You can order your copier supplies from any local, authorized
HP dealer. See page 9-4 for more information.