HP C5370A - Manual (Page 49)

HP Color Copier User’s Guide 5-11
.
You are copying an original that
is greater than 8” wide, and the
solution above did not solve the
problem. Place the original on the glass and place white sheets of
paper on toe of the original to cover the entire glass.
Copies crooked on page
Possible Causes Solutions
The original is crooked on the
glass. Reposition the original against the green borders.
The original is placed incorrectly
in the automatic document
feeder. Be sure to place originals in the document feeder with
the printed side facing back and the top of the document
all the way to the right.
The width and length adjusters
on the bottom tray are not flush
against the paper. Move the width and length adjusters up against the stack
of paper.
Different sizes of paper are
loaded in the tray. Load only one size of paper at a time. Only A (Letter)
and A4 size paper can be used.
The document feeder paper
adjuster is not flush against the
bottom of your originals. Move the document feeder paper adjuster until it is flush
against the bottom of your originals.
Miscellaneous problems
Symptoms Solutions
Back of newspaper print shows
through. ‹ Press the Lighter/Darker button. Press the Minus (–)
button to lighten your copy. The round dot moves to
the left on the scale.
‹ Place a dark piece of paper on top of the newspaper.
Large, black typefaces have a
splotchy (not smooth)
appearance; or thin, color objects
or lines have black sections. Turn off TE (Text Enhancement). Press the Menu button
until “TE” appears on the display. Press the Plus (+) or
Minus (–) button to turn TE off (noted by a round dot),
and then press the Select/Resume button.
Adjust the Lighter/Darker setting: lighten the copy by at
least 3 notches.
Black bar in margins on copy (Models 145 and 155 only)
Possible Causes Solutions