HP SAP Smart Forms and Zeberea Print - Manual (Page 10)

Driving Zebra Printers from Smart Forms
13760L Page 9
© SAP AG 2004. All rights reserved.
You should now see the screen below, exactly the same as the previous screen but with a
new line of icons. Press the Create
icon.
© SAP AG 2004. All rights reserved.
At the “Spool Administration: Create Output Device”, similar to the screen below, do
the following:
1) Allocate the Output Device name. You may also allocate a shortname
2) Select the Device Type, i.e. Zlzeb3
3) Enter Location and Message if required