HP SAP Smart Forms and Zeberea Print - Manual (Page 47)

Driving Zebra Printers from Smart Forms
13760L Page 46
Printer Settings
Command Nodes allow you to set printer specific settings from within individual Smart
Forms. Each Smart Form may have different settings associated with it. This means that
you can have a Smart Form set the printer’s darkness (burn temperature) and print speed
(as well as many more settings).
Command Nodes are set by selecting a page Windows and pressing the Right Mouse
Button over the tree structure and then select “Create | Command.” See the diagram
below:
© SAP AG 2004. All rights reserved.
The ZPL II commands must be entered in the command node using quotation
marks.