HP ProLiant ML310 - Manual (Page 28)

Start-up Time (typical) < 7seconds
Stop Time < 4seconds
Laser Parameters Type Semiconductor Laser GaA1As
Wave Length 780 ± 25 nm
Operating Conditions Temperature 41° to 113° F (5° to 45° C)
Humidity 10% to 80%
Dimensions (HxWxD, maximum) 1.7 x 5.85 x 8.11 in (4.29 x 14.86 x 20.60 cm)
Weight 2.09 lb (0.95 kg)
Embedded NC320i PCIe
Gigabit Server Adapter Network Interface 10Base-T/100Base-TX/1000Base-TX
Compatibility IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method Single lane (x1), 100MHz PCI Express Reference Clock
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half-
Duplex) 100 Mb/s
100Base-TX (Full-
Duplex) 200 Mb/s
1000Base-TX (Half and
Full-Duplex) 2000Mb/s
Connector RJ-45
Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)
Integrated 4 Channel
SATA Controller
(SATA Models only)
Drives Supported Up to 4 SATA hard drives (1 drive/channel)
Channels 4
Storage Capacity 2 TB
Maximum SATA
Channel Transfer Rate 150 MB/s per channel
SATA Protocols SATA-1a
Internal SATA
Connectors One 4-lane connector (all four channels)
RAID levels supported RAID 0, RAID 1
QuickSpecs
HP ProLiant ML310 Generation 3
Technical Specifications
DA - 12364 Worldwide QuickSpecs — Version 21 — 2-16-2007 Page 28