HANNspree 9.6" LIQUID CRYSTAL DISPLAY ST08-10A1 - Manual (Page 29)

28
Turning the TV On and Off
1
Press POWER on the remote
control or on the TV control panel.
The power LED indicator on the
front of the TV changes from red to
green, indicating that the power is
on.
2
Press the POWER button again.
The power LED changes from
green to red, indicating that the TV
is in standby (off) mode.
Selecting Channels
1
Press the channel up button to
increase the channel number by
one.
2
Press the channel down button to
decrease the channel number by
one.
3
Enter the specific channel number
by pressing the number buttons on
the remote control. The channel is
displayed on the LCD panel.
VOL CH MENU
SOURCE
CH 33
Power button
Power LED
and
VOL CH MENU
SOURCE
CH 33
Channel up
Channel down