HANNspree 9.6" LIQUID CRYSTAL DISPLAY ST08-10A1 - Manual (Page 30)

29
Switching Source Signals
Press SOURCE to select different
source signals.
CH, AV1, and AV2 appear on the
top right corner of the screen in that
order.
Note
The TV supports S-Video input in addi-
tion to normal video and audio sig-
nals. The TV detects the signal type
automatically and gives priority to S-
video when two signals are detected at
the same time.
Adjusting the Volume
1
Press the volume up button to
increase the volume.
2
Press the volume down button to
decrease the volume.
3
Press MUTE. The word “MUTE”
appears on the top right corner of
the screen and sound is turned
off.
4
Press MUTE again to restore the
original volume.
VOL CH MENU SOURCE
CH 33
Source
VOL CH MENU
SOURCE
MUTE
Volume up
Volume down