HANNspree 9.6" LIQUID CRYSTAL DISPLAY ST08-10A1 - Manual (Page 47)

46
Channel Add/Erase
1
Press the CH DOWN button to
select CH ADD/ERASE.
2
Press the VOL UP button. The OSD
menu display switches to the fol-
lowing screen.
3 Press the CH UP/DOWN button on
the front panel to select a channel.
Add Channel
Then press the VOL UP button to add
the selected channel. The channel num-
ber changes from yellow into green after
adding the channel.
Erase Channel
Then press the VOL DOWN button to
erase the selected channel. The channel
number changes from green into yellow
after erasing the channel.
TV
TV/CATV
CH
AUTO PROGRAM
ADD/ERASE
MENU
SEL SEL ENTER ENTER MENU MENU
CATV
MENU MENU
TV
-ERASE ADD+
CH UP/DOWN
43
Note
You can still access the erased channel
by entering the channel number using
the number buttons on the remote con-
trol. Add the channel again if it was
erased accidentally.