Hitachi 50VX915 - Manual (Page 32)

HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
32
THE REMOTE CONTROL
AV NET LEARNING WIZARD
This function of the AV NET makes it more expandable because it allows the user to use equipment that is not supported by the
pre-code library, listed on page 25-26. For example, after programming your equipment to the AV NET and the soft keys do not
work, the user just has to follow the steps below. The AV NET Learning Wizard will transfer any remote button IR code of your
equipment to the soft keys of your AV NET. If all remote button transfers are successful, the user can now control their equipment
by using the LCD Rear PTV remote control.
HITACHI AV NET WIZARD (Learning)
Press and hold desired button to
transfer the command to AV NET.
Please wait while AV NET
Learns the command...
Please choose the device to set up.
( ) DVD ( ) Set Top Box
( ) DVD2 ( ) DVD3 (Custom)
( ) VCR ( ) VCR3 (Custom)
( ) VCR2 ( ) PVR2 (Custom)
( ) AV Receiver ( ) CBL2 (Custom)
( ) PV Recorder ( ) STB2 (Custom)
( ) Cable Box List
BACK SETUP MODIFY
Move
SEL Next Step
HITACHI AV NET WIZARD (Learning)
Select the VCR3 softkey to learn?
TV Softkeys
BACK
POWER
CH
SELECT EXIT
Move
SEL Select
CH TV/VCR MENU
HITACHI AV NET WIZARD (Learning)
Transfer not completed!
Try again?
NO YES
Move
SEL Select
HITACHI AV NET WIZARD (Learning)
Transfer was successfull
Press OK to continue.
BACK OK
Move
SEL Select
YES
1. Press A/V NET button on the remote control.
2. Use the CURSOR PAD to select DEVICE SETUP, press the SELECT button.
3. Use the CURSOR PAD/SELECT button to choose CUSTOM option (Ex. VCR3).
4. Use the CURSOR PAD to select Setup, press the SELECT button.
1. Select TV Softkeys to learn, press the SELECT button.
1. Press and hold the
̈̈
button of the VCR remote control while pointing directly
at the learning AV NET sensor of the LCD Rear PTV (see pages 8-9) at a
distance of 2 to 3 meters.
1. Select OK to continue.
NOTES: 1. To access the Menu function of a specific equipment, select the “MENU” soft key on OSD, then press the MENU but-
ton of the LCD Rear PTV remote control. In order to use CURSOR PAD and EXIT button of the LCD Rear PTV remote
control, “arrows, select, and EXIT” button must be learned. Then the menu of the programmed equipment can be con-
trolled with the LCD Rear PTV remote control.
2. When using the Learned device with the Timer Recording function, the Power, Stop and Record soft Keys should be
learned first.