Hitachi 50VX915 - Manual (Page 72)

72
ON-SCREEN DISPLA
Y
TIMERS
Select this feature to set and record digital channels using your device connected to the IEEE 1394 jacks (ex.
D-VHS) or Monitor Out (ex. VCR). Set Timer
Recording
Move SEL Return
Timers
Set Timer Recording
Timers
Set Day/Night Timer
Set Sleep Timer
Set The Clock
Set Event Timer
Set Auto Power Off
Move SEL
Set Timer Recording
Select
Record1 --:--AM --:--AM Jan.01, 2003
Ant A ------- DVHS1
Record2 --:--AM --:--AM Jan.01, 2003
Ant A ------- DVHS1
Record3 --:--AM --:--AM Jan.01, 2003
Ant A ------- DVHS1
Record4 --:--AM --:--AM Jan.01, 2003
Ant A ------- DVHS1
NOTES: 1. Set the Time and connect the devices before using this feature.
2. The Timer Recording has priority over the Event Timer. If the Timer Recording is set at the same time as the Event
Timer or overlaps with each other, the TV will only perform the function of the Timer Recording.
3. When you use the Monitor Out, AV Network Setting are needed (see pages 23-32).
4.
Antenna B is not available when using CableCARD.
5. Refer to your device operating guide for more information.
6. Turn off the device before recording. The television automatically turns on the device for recording.
Use CURSOR PAD
̆
,
̄
to highlight Record 1, Record 2, Record 3 and then press CURSOR PAD to select.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select START TIME Hour/Minute.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select START TIME AM/PM.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select FINISH TIME Hour/Minute.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select FINISH TIME AM/PM.
Use CURSOR PAD
̈
to highlight the MONTH.
Use CURSOR PAD
̆
to select a MONTH or CURSOR PAD
̄
to select Daily, Weekly - Sunday to Monday. Use CURSOR PAD
̆
to
return to MONTH.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select the DAY of the MONTH.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select the YEAR.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select ANT A or B channel # to be recorded.
Use CURSOR PAD
̈
,
̆
,
̄
to highlight and select Device to be used.
Press the SELECT button to return and highlight Record 1.
A “
✓ “ in the box means it is enabled.