Hitachi 50VX915 - Manual (Page 79)

SETUP
79
ON-SCREEN DISPLA
Y
NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Upgrades
Move SEL Return
Software Version #: Main VXXXX.XXXX
1394 VXXXX.03
MMC Software Upgrade
Please insert MMC card
before upgrading.
Upgrade Now
Set Stand-By Mode
Upgrades
Set AV Control
CableCARD Info
Setup
Move SEL Select
Setup
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please
complete and return the warranty card.
Insert MMC card, then press the CURSOR PAD
̆
,
̄
to highlight “Upgrade Now”. Press the SELECT button to select and start
upgrading.
This function sets the IEEE1394 in Stand-By Mode to ON or OFF. Certain digital devices have a power save
feature, in which the device automatically powers OFF when not in use (sleep mode). Only by setting the
IEEE1394 function in Stand-By mode to ON, will the TV be able to control a device that is in sleep mode.
Set Stand-By Mode
Set Stand-By Mode
Upgrades
Set AV Control
CableCARD Info.
Setup
Move SEL Return
Setup
Set Stand-By Mode
Move SEL Return
If you want to use the IEEE1394
function in the Stand-By, please
set the IEEE1394 Stand-By mode.
IEEE1394 Stand-By
NOTE: By turning ON the IEEE1394 function, your TV set will no longer be set for power saving Stand-By mode. The IEEE1394
Stand-By function must be set to OFF to return your TV set to the power saving Stand-By mode.