Henkel Structural Bonding Solutions - Manual (Page 4)

3421 A&B 3423 A&B 9481 A&B 9483 A&B 9484 A&B 9489 A&B 3430 A&B 9455 A&B 3422 A&B 9450 A&B 3450 A&B 3455 A&B 3463 A&B3425 A&B 9466 A&B 9461 A&B 9464 A&B 9514 9496 A&B 9497 A&B 9492 A&B 9535 9509 9502 9514
4
6 8 10 12
Steel
Stainless steel
Zinc dichromate steel
Hot dipped galvanised steel
Aluminium
Copper
Brass
Thermoplastics
Thermoset plastics
GRP / SMC composites
Rubbers
Glass
Ceramic
Masonry
Wood
Loctite ® Hysol ®
Five-minute
epoxies
Toughened
epoxies
High temperature
epoxies
Substrate Selector Guide
Loctite ® Hysol ® Epoxy adhesives bond a wide range of substrates.
Please refer to the chart below to select the best adhesive for your application. Each adhesive is colour coded to its product group.
Refer to the following pages for product description and typical properties of the recommended adhesive.
General purpose
epoxies
Page Page Page Page
Highly recommended
Recommended
• Thermoplastics:
ABS, Acrylic, PA, PC, PVC, SAN
• Thermoset plastics:
DAP, Epoxy, Phenolic, Polyester
• Rubbers:
Butyl, EPDM, Natural, Neoprene,
Nitrile, SBR
Henkel recommends that the selected product for your specific application is evaluated to determine suitability. If you require additional
information or advice, Henkel has technical personnel trained to provide on site design and engineering support, application testing, validation
and integration of dispensing and cure systems.
The Loctite
® Hysol ® range is part of an extensive range of high-performance adhesives and sealants designed for industrial use. This includes
anaerobic, cyanoacrylate, light curing and specialised silicone adhesives. For more information on the complete range of Loctite ® products
please contact Henkel or visit the web site at www.loctite.com.
for an initial product recommendation