HONDA HANDI EU3000I - Manual (Page 36)

34
OPERATION
DC OPERATION
WARNING:
Wash hands after handling.
Connecting the battery charging cable (optional equipment):
The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
Battery posts, terminals, and related accessories contain
lead and lead components.
Wear protective clothing and a face
shield, or have a skilled mechanic
perform the battery maintenance.
A spark or flame can cause the
battery to explode with enough
force to kill or seriously hurt you.
The battery gives off explosive
hydrogen gas during normal
operation.
When using the DC output, turn the Eco-Throttle switch to the OFF
position.
When using the AC power together with DC power, do not exceed 20.8
ampere AC load.
The DC receptacle can be used while the AC power is in use.
Before connecting the battery charging cable to a battery that is
installed in a vehicle, disconnect the vehicle battery ground cable
from the negative (
) battery terminal.
Plug the battery charging cable into the DC receptacle of the
generator.
1.
2.
09/02/24 18:05:25 31Z28600_035