HP 3380 - Manual (Page 106)

5. Lower the green lever so that the flat green part fits between the rollers. Press down on
the green lever until you hear it snap into place.
6. To check for proper installation, lift the green lever until it remains open. The new pickup
roller assembly should be secured to the lever assembly and should not fall out.
7. Make sure that both sides of the assembly are secured by the green hooks.
8. Lower the green lever assembly and close the ADF lid. Reinstall the input tray.
Note If you are experiencing jams in the ADF, you might want to order a new ADF. See Installing an
ADF .
9. Plug the device in, and turn on the power switch.
94 Chapter 7 Cleaning and maintenance ENWW