HP C100/110 - Manual (Page 206)

190
The Boot Console Interface
Displaying and Setting the Monitor Type
The MONITOR INFORMATION table reappears with the new monitor
shown in slot0.
MONITOR INFORMATION
Slot # HPA State Resolution Frequency Class
--------- ------- ---- ---------- --------- -------
graphics3 f4000000 Present Fixed
graphics4 f6000000 Empty
Current Console Path: core.RS232_.9600.8.none
Stable Store Console Path:GRAPHICS3
Trying to change the monitor type on a slot that cannot support that monitor
results in a warning, as shown in the following example:
Configuration Menu: Enter command > monitor graphics3
MONITOR INFORMATION
Reminder: SGIC only supports one type of monitor.
Changing its monitor type will not have any effect.
Slot # HPA State Resolution Frequency Class
--------- ------- ---- ---------- --------- -------
graphics3 f4000000 Present Fixed
graphics4 f6000000 Empty
Current Console Path: core.RS232_.9600.8.none
Stable Store Console Path:GRAPHICS3