HP C100/110 User Manual
Page 52
36
Setting Up Your Printer
Setting Up Your Printer for Network Printing
The line should look like the following:
printer stream tcp nowait root /usr/lib/rlpdaemon rlpdaemon -i
5
Save the file and close it.
6
Click on the Terminal Control on the Front Panel of your Workspace.
A terminal window opens.
7
Move the mouse cursor into the terminal window and click the left mouse button.
8
If you are using HP-UX 9.05, enter the following command line to reboot your
workstation:
/etc/reboot
If you are using HP-UX 10.0, enter the following command line to reboot your
workstation:
/usr/sbin/reboot
Your workstation shuts itself down and then reboots automatically. This may
take a few minutes. When the login prompt returns, your system is ready to
accept printer requests from other computers on your network.