Hitachi 32HLX61 - Manual (Page 14)

CONNECTING LCD DISPLAY MONITOR TO AVC BOX
14
It is recommended that the subwoofer cable will be binded together with the Power Swivel connector using one of the accessory wire
clamps (see below).
1. From the owner’s accessory you will find the Monitor Connector cable.
2. Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box “TO MONITOR” connectors.
3. Insert the other ends of the Monitor Connection Cable to the display monitor rear panel “FROM AVC” connectors.
Back of AVC Center
To AC
outlet
To AC
outlet
Core
AC IN
TO MONITOR
Please use HITACHI specified cable.
Back of Display Monitor
NOTE: The Display Monitor and the AVC Center have their own AC Power. Both AC cords must be completely plugged in to
the AVC Center and the display monitor, then plug them in to the AC outlets.
FIRST TIME USE
Give enough slack to the cables.
Accessory Wire Clamp
Subwoofer Cable Power Swivel Connector
Swivel Side of Tabletop
Subwoofer Cable should be
clamped with the power swivel
connector.
Stand
Firmly bind the cables.
Thread the square
hole with the band. Hook the band
to the claw.