Hitachi 32HLX61 - Manual (Page 39)

39
GU ID E
A/V N ET
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD TV
NOTES: 1. The digital device will be automatically recognized if properly connected.
2. Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used. If a fifth device is
connected, it will replace the first device on the menu list.
3. This TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video Camcorder) or a PC.
4. The On-Screen-Display will not disappear until the EXIT button is pressed.
5. Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other
manufacturers devices should be brought to the attention of those manufacturers.
6. TV IN/OUT functions are not available when DVHS is in playback or recording.
IEEE1394 Use this function to control your devices with digital interface capability. Press the INPUTS button, CURSOR PAD and
SELECT button to select IEEE 1394.
(When an IEEE1394 device is not connected)
(When an IEEE1394 device is connected)
Use CURSOR PAD ̆ or ̄ to highlight connected device (example D-VHS1).
Use CURSOR PAD ̈ to select connected device (example D-VHS1).
Use CURSOR PAD cursors to highlight POWER.
Press the SELECT button to power on the device.
Use CURSOR PAD cursors to select D-VHS operation.
Press down on the CURSOR PAD to enable the selected operation.
Use CURSOR PAD cursors to highlight the TV IN/OUT operation.
Press SELECT to select: TV IN is DVHS
TV OUT is ANT A
Ant B
Photo Input
IEEE 1394
RGB
or
Input 5
INPUTS
Device not detected
Move SEL Sel.
DVHS1 POWER
Move Select
ANT
SEL
In/Out: TV TV
Move
DVHS1 POWER
Move Select
00:00:00
ANT
SEL
In/Out: TV TV
[DEVICE MAKER DEVICE MODEL ]
Counter : 00:11:30
Ant B
Photo Input
or
IEEE 1394
RGB
Input 5
Move SEL Sel.
00:00:00
INPUTS
THE REMOTE CONTROL