Hitachi 32HLX61 - Manual (Page 88)

RGB ON SCREEN DISPLAY
88
USING THE RGB INPUT
Enhances the picture detail.
Use CURSOR PAD ̇ or ̈ to set ENHANCER Off, Low,
Medium or High. Press the MENU button to return to
RGB MODE MENU or EXIT to quit.
ENHANCER
Enhancer
Color Temperature
Brightness
Contrast
Video
High
Off
100%
50%
Back Light
Move SEL Select
Reset Reset
100%
Set CONTRAST, BRIGHTNESS, COLOR TEMPERATURE, and ENHANCER to factory
preset condition.
Use CURSOR PAD ̇ or ̈ to highlight Reset.
Press the SELECT button to RESET to factory
preset settings. Press the MENU button to return to RGB
MODE MENU or EXIT to quit.
RESET
Enhancer
Color Temperature
Brightness
Contrast
Video
Reset
High
Off
100%
50%
Back Light
Reset
100%
Move SEL Select
Adjusts the overall back light illumination.
Use CURSOR PAD ̇ or ̈ to adjust Back Light.
Press the MENU button to return to RGB MODE MENU
or EXIT to quit.
BACK LIGHT
Enhancer
Color Temperature
Brightness
Contrast
Video
High
Off
100%
50%
Back Light
Reset
100%
Move SEL Select
Reset
Use CURSOR PADS to highlight chosen selections.
Press SELECT button to set and EXIT button to quit.
Mode
Aspect
Move SEL Return
Real Normal Full
WXGA Mode
Off 1280x768 1366x768
Input Signal Mode WXGA Mode
XGA Normal Off
WXGA (1280x768) Full 1280x768
WXGA (1366x768) Full 1366x768
Recommendation
Others SVGA/XGA VGA 480p 720p 1080i
X REAL REAL REAL(1) X X
NORMAL NORMAL NORMAL NORMAL(1) X X
FULL FULL FULL FULL(1) FULL(2,3) FULL(2,3)
ASPECT
MODE
AVAILABILITY
RGB (Analog) INPUT SIGNAL
For numbers in ( ), please see corresponding note below.
RGB ASPECT DISPLAY MODE.
NOTES: 1. Lack of raster can be seen in RGB when a 480p signal is input.
2. AUTO ADJUST function (see page 89) is not available in 720p, 1080i, and 480p input signal.
3. FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan).
Use this function to select the picture format aspect ratio while using RGB input.
ASPECT
•Press the MENU button in RGB mode.
•Use the CURSOR PAD
̆ or ̄ to select ASPECT.
•Press SELECT or CURSOR PAD ̈ to access ASPECT menu.